Ring hammer crusher is to crush the material by the high-speed rotating hammers. This ring hammer crusher has the characteristics of simple structure, large crushing ratio, and high production efficiency. It can be used to crush the dry or wet materials. It is used to crush the mid-hard and low-abrasive materials, whose compressive strength is not more than 100MPa, and whose moisture percentage is not more than 15%. The common materials are coal, salt, chalk, gypsum, limestone, and so on. It is also used to crush the wood pieces, paper, and asbestos cement waste, which are fiber-structural, elastic and strong tenacity. Ring hammer crusher is not only used in aggregate or sand production line, but also in mineral selection process instead of cone crusher.
Ring Hammer Crusher is used to crush coal, especially brittle materials, like gangue, coke, slag, red sandstone, shale, loose limestone, etc. The compressive strength of the material does not surpass 15%. It has the following features: energy-saving, fine output size, higher efficiency, and lower noise, less dust pollution and so on.
Application of Ring Hammer Crusher
Ring hammer crusher is a machine which is utilized to crush the brittle materials, like coal, coal gangue, coke, slag, red sandstone, shale, loose limestone, etc. The compressive strength of the material does not surpass 100MPa, and its moisture content does not surpass 15%. The discharge opening can be adjusted according to the customer’s requirements.
Working Principle
Ring hammer crusher is an impact rotor-type crusher with hammer ring. The materials are impacted and crushed by the high-speed rotating hammers after entering the chamber. The crushed materials get the impetus energy from the hammers, and then they will impact on the crushing plate. After the secondary crushing process, the materials fall on the sieve plate. Then the materials are crushed again after being sheared, extruded, and grinded, and then drop out. Unbroken matters enter the metal collector, which are cleaned periodically.PCH Series Ring Hammer Crusher is most suitable for crushing brittle materials such as coal, gangue, coke, slag, red sandstone, shale and loose limestone, etc. The compressive strength of the material should not surpass 100MPa. Moisture content is not more than 15%. This series of machine broke materials through the high-speed rotating hammer body and collision the material surface?it has a simple structure, large crushing ratio, high production efficiency and other characteristics?it can be used for dry and wet two forms crushing?it applies to mining, cement, coal, metallurgy, building materials, roads, fire and other departments chronology medium hardness and brittle materials. The device can change material particle size and adjust gap of article grate in accordance with user requirements, so it can meet different users’ demand. From this page, you can get the Aac Plant,Ceramic Ball Mill,Hammer Crusher Manufacturers,Hammer Crusher,impact crusher,ball mill ,ball mill,stone crusher,Rotary Kiln,Mineral Processing from Shanghai Minggong Heavy Equipment Co., Ltd. if you are interested in our products,please contact us by E-mail([email protected]) or telphone, thank you.
No Comments Found